Heavy Load Double Screw Extruder Gearbox Use Bearing M2CT431863

Heavy load double screw extruder gearbox use bearing M2CT431863

Heavy duty plastic rubber food extruder screw gearbox use two stages thrust roller bearing M2CT431863 with full size 431.8*863x449.725mm, it can carry axial direction load. There are two major types of extruders; single and twin screw co-rotating and counter rotating that will use tandem roller bearing.
Bearing factory Number:M2CT145385
Item code:M2CT145385
Original place:China LuoYang
Application: plastic/rubber/pet food double screw extruder gearbox
Lubrication:Oil lubrication
Boundary dimension:431.8*863x449.725mm
Bearing shaft diameter:17” inch size
Bearing outer diameter:33.97”inch size
Bearing width:17.7 inch size
Tandem stages number:two row stages
Bearing Material:High quality bearing steel
Description:cylindrical roller thrust bearing
UPC/HS code:8482500090
Outer diameter D:863mm
Inner diameter d:431.8mm
The total height:449.725mm
Cage type Nylon or Steel or Brass Standard Cage

Tandem bearings consist of several axially arranged thrust cylindrical roller and cage assemblies. Two, three or four thrust cylindrical roller and cage assemblies can be used, corresponding to
product designations 2,3,4,5,Six row and eight row tandem bearings are also available. These products consist of two triple row and two four row tandem bearings respectively. The special elastic system of matched rings and washers made from hardened rolling bearing steel ensures that there is an equal load on all rows regardless of the magnitude of the axial load. Bench marking performed has shown that a comparable competitor product has been designed only for a certain point of operation. Axial loads deviating from this point are not supported equally across all stages.