Payment & Shipping Terms:
|Lubrication:||Grease Or Oil||Delivery Time:||In Stock|
|Cage Material:||Steel Brass Cage||Structure:||Tandem Structure|
Deep hole drilling equipment bearing T4AR1242 M4CT1242 12*42*83.5MM four row tandem structure
Tandem bearings T4AR1242 M4CT1242 consist of several axial cylindrical roller bearings arranged in line, A system of rings and washers matched to each other ensures that all stages of the tandem bearing are subjected to uniform load at all times irrespective of the ratio C/F. The rings and washers are made from hardened steel. Tandem bearings are predominantly fitted with standard axial cylindrical roller and bearing assemblies. The thrust cylindrical roller bearing T4AR1242 M4CT1242 with size 12*42*83.5MM, the inner diameter:12 mm, the outer diameter:42mm, the total height:83.5mm
|Tandem bearing old code||Tandem bearing new code||Basic size unit(mm)||
Basic load rating
|Inner dia||Outer dia||Height||Cr||Cor||kg|
|Principal dimensions||Basic load ratings||Weight||Old_spec||Designations|
Multi Stage cylindrical roller thrust bearings(Tandem bearings) has the characteristics of limited radial space, high axial forces, equal support of all the rows of rollers and long operating life, and is the ideal spindle of parallel screw extruder.
The tandem bearings provided by our institute has the following types: double rows, three rows, four rows, five rows, six rows and eight rows, we also provided bearings with shaft and sleeve barrel. Customers can have their own selections according to center distance of screws, space and load. We also accept the orders of other dimensions.
Application of tandem bearings
When using tandem bearings, the following recommendations should be adhered to:
1. Preload: 1% of the dynamic basic load rating. The dynamic basic load rating of each tandem bearing . Figures not listed will be provided by out institute on request.
2. Radial guidance: full complement cylindrical roller bearings or needle roller bearings can be used.
3. Eliminate tilting: the supporting parts must be machined to eliminate any tilting.
4. Mounting tolerances: recommended the following mounting tolerances: shaft f6 and housing bore F7.
5. Lubrication: tandem bearings must always be lubricated by oil circulation.
Tandem bearings consist of several axial cylindrical roller bearings arranged in line, Figure 1. A system of rings and washers matched to each other ensures that all stages of the tandem bearing are subjected to uniform load at all times irrespective of the ratio C/F. The rings and washers are made from hardened steel. Tandem bearings are predominantly fitted with standard axial cylindrical roller and bearing assemblies. Figure 3, page 3, shows the power flow in a tandem bearing.
Tandem bearings offer an optimum solution wherever the following requirements apply:
■ small radial design envelope
■ high axial forces
■ long operating life
■ low frictional energy.
Tandem bearings have proven effective principally in gearboxes for single and twin screw extruders in the rubber and plastics industry.
Other possible applications include:
■ deep hole drilling equipment
■ friction welding machines.