Crossed roller bearing RA12008UUCC0 120x136x8mm used for ndustry robot swiveling unit, in stocks

Crossed roller bearing RA12008UUCC0 120x136x8mm used for ndustry robot swiveling unit, in stocks

We/JinHang Precision bearing Co.,LTD offer crossed roller bearing RA12008UUCC0 with double seal and CC0 Clearance. the inner ring and outer ring and roller material are GCr15. It is strictly required high precision and rigid.RA12008UUCC0 Bearing with the structure of both inner ring and outer ring are integrated, integrated raceway, with putting roller hole on outer ring.Thinnest possible inner and
outer rings, Effective to deduct structure weight, An easy install and ultra-thin wall type. It is used in locations where high rigidity and high precision of both inner and outer ring are required.

The RA12008UUCC0 Bearing dimension specification as follows:

UU:with seal attached on both sides
U:with seal attached on one side
CCO:negative clearance
CO:positive clearance
C1:positive clearance(greater than CO)
Grade: No Symbol normal grade 0
USP:USP grade rotation accuracy
P5: P5 grade rotation accuracy
The delivery time: in stock
The package:vacuum packing and carton

RA12008 UUCC0 Crossed roller bearing actual bearing pictures as following:

Crossed roller beairng RA12008UUCC0 application:
Industry robot joints
Industry robot swiveling unit
Swiveling table of machining centers
Rotary units of manipulators
Precision rotary tables,
Medical equipment
Measuring instruments
IC Manufacturing machines

Besides of RA12008UUCC0,We can offer RA5008UUCC0,RA6008UUCC0,RA8008UUCC0,RA7008UUCC0,RA9008UUCC0,RA11008UUCC0,RA12008UUCC0,RA12008UUCC0,RA13008UUCC0,RA14008UUCC0,RA15008UUCC0,RA16013UUCC0,RA170013UUCC0,RA18013UUCC0,RA19013UUCC0,RA20013UUCC0 and customized crossed roller bearing type.

About the crossed roller bearing RA12008UUCC0 Installation and lubrication:
For the RA12008UUCC0 Bearing we had filled in the good No.2 Li Base grease into them,then it can be directly mounted after receiving the RA12008UUCC0  Bearing.But compared with other conventional roller bearing,the internal space is smaller,so regular refill the grease is necessary.

The grease is entering into the oil holes which in the ring and connected with oil gap.The intervals are usually six months in one year.Please use the same grease to fill into the RA12008UUCC0 Bearing.
But note that,because of the resistance of grease,the torque moment will increase in a short time the the beginning period.After redundant grease overflows from the seals ,It will recover the normal torque value.

JinHang Precision Bearing Co.,Ltd

www.chinajhbearing.com

www.lyjhbearing.com

Address: Yiyang Bearing Industry Zone, Luoyang City, China 47100

Mob:0086 180 379 70383

WhatsApp:0086 180 379 70383

Fax:0086 379 65199160

E-mail:lyjh@lyjhbearing.com

lyjhbearing@gmail.com

sales@lyjhbearing.com

Skype:million556

QQ:1816532220